Brocade FastIron Ethernet Switch Platform and Layer 2 Swit Manual do Utilizador descarregar pdf (Página 103)

VSRP parameters (Continued)TABLE 21

Parameter Description Default For more

information

Backup Hello state

and interval

The amount of time between Hello messages

from a Backup to the Master.

The message interval can be from 60 - 3600

seconds.

You must enable the Backup to send the

messages. The messages are disabled by default

on Backups. The current Master sends Hello

messages by default.

Disabled

60 seconds

when enabled

Changing the backup

hello state and

interval setting on

page 110

Hold-down interval The amount of time a Backup that has sent a

Hello packet announcing its intent to become

Master waits before beginning to forward traffic for

the VRID. The hold-down interval prevents Layer

2 loops from occurring during VSRP rapid failover.

The interval can from 1 - 84 seconds.

3 seconds Changing the hold-

down interval setting

on page 110

Track priority A VSRP priority value assigned to the tracked

ports. If a tracked port link goes down, the VRID

port VSRP priority is reduced by the amount of the

tracked port priority.

5 Changing the default

track priority setting

on page 110

Track port A track port is a port or virtual routing interface

that is outside the VRID but whose link state is

tracked by the VRID. Typically, the tracked

interface represents the other side of VRID traffic

flow through the device.

If the link for a tracked interface goes down, the

VSRP priority of the VRID interface is changed,

causing the devices to renegotiate for Master.

None Specifying a track

port setting on page

111

Backup preempt

mode

Prevents a Backup with a higher VSRP priority

from taking control of the VRID from another

Backup that has a lower priority but has already

assumed control of the VRID.

Enabled Disabling or re-

enabling backup pre-

emption setting on

page 111

VRID active state The active state of the VSRP VRID. Disabled Configuring basic

VSRP parameters on

page 104

RIP parameters

Suppression of

RIP

Comentários a estes Manuais

Sem comentários

Brocade FastIron Ethernet Switch Platform and Layer 2 Swit Manual do Utilizador Página 103

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Brocade FastIron Ethernet Switch Platform and Layer 2 Swit