Brocade Multi-Service IronWare Switching Configuration Gui Manual do Utilizador descarregar pdf (Página 455)

Multi-Service IronWare Switching Configuration Guide 425

53-1003036-02

Convergence in a simple topology

Now, Port3/Switch 3 is currently in a discarding state and is negotiating a port role. It received RST

BPDUs from Port3/Switch 2. The RSTP algorithm determines that the RST BPDUs Port3/Switch 3

received are superior to those it can transmit; however, they are not superior to those that are

currently being received by the current Root port (Port4). Therefore, Port3 retains the role of

Alternate port.

Ports 3/Switch 1 and Port5/Switch 1 are physically connected. Port5/Switch 1 received RST

BPDUs that are superior to those received on Port3/Switch 1; therefore, Port5/Switch 1 is given

the Backup port role while Port3 is given the Designated port role. Port3/Switch 1, does not go

directly into a forwarding state. It waits until the forward delay time expires twice on that port before

it can proceed to the forwarding state.

Once convergence is achieved, the active Layer 2 forwarding path converges as shown in Figure 87.

FIGURE 87 Active Layer 2 path

Sem comentários

Brocade Multi-Service IronWare Switching Configuration Gui Manual do Utilizador Página 455