Brocade Mobility Access Point System Reference Guide (Supp Manual do Utilizador descarregar pdf (Página 284)

100

101

274 Brocade Mobility Access Point System Reference Guide

53-1003100-01

If required, select a radio configuration and select the Edit button to modify or override portions of

its configuration.

FIGURE 140 Device Overrides - Access Point Radio Settings tab

The Radio Settings tab displays by default.

RF Mode

Displays whether each listed radio is operating in the 802.11a/n or 802.11b/g/n radio band. If the

radio is a dedicated sensor, it will be listed as a sensor to define the radio as not providing typical

WLAN support. If the radio is a client bridge, it will be listed as a client bridge and does not provide

typical WLAN support. The radio band is set from within the Radio Settings tab.

Channel

Lists the channel setting for the radio. Smart is the default setting. If set to smart, the access point

scans non-overlapping channels listening for beacons from other access points. After the channels

are scanned, it selects the channel with the fewest access points. In the case of multiple access

points on the same channel, it will select the channel with the lowest average power level.

Transmit Power

Lists the transmit power for each radio.

Overrides

Click the Clear to clear overrides made to this radio interface. This field is blank if there are no

overrides for this radio.

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 853 854

Comentários a estes Manuais

Sem comentários

Brocade Mobility Access Point System Reference Guide (Supp Manual do Utilizador Página 284

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Brocade Mobility Access Point System Reference Guide (Supp