Brocade Mobility Access Point System Reference Guide (Supp Manual do Utilizador descarregar pdf (Página 439)

100

101

Brocade Mobility Access Point System Reference Guide 429

53-1003100-01

Client load balance settings can be defined generically for both the 2.4 GHz and 5.0 GHz bands,

and specifically for either of the 2.4 GHz or 5.0 GHz bands.

To configure client load balancing settings on an access point managed WLAN:

1. Select the Configuration tab from the Web UI.

Select Wireless.

Select Wireless LANs to display a high level display of existing WLANs.

2. Select the Add button to create an additional WLAN, or Edit to modify the properties of an

existing WLAN.

3. Select Client Load Balancing.

FIGURE 17 WLAN - Client Load Balancing screen

4. Set the following Load Balance Settings generic to both the 2.4 GHz and 5.0 GHz bands:

Enforce Client Load

Balancing

Select this radio button to enforce a client load balance distribution on this WLAN. This setting is

disabled by default.

Loads are balanced by ignoring association and probe requests. Probes and association requests

are not responded to, forcing a client to associate with another access point.

Band Discovery Interval

Define a value in either Seconds (0 - 10,000), Minutes (0 -166) or Hours (0 -2) the access point

uses to discover a client’s band capabilities before associating. The default is 10 seconds.

Capability Ageout Time

Define a value in either Seconds (0 - 10,000), Minutes (0 -166) or Hours (0 -2) to ageout a client’s

capabilities from the access point’s internal table. The default is 1 hour.

1 2 ... 434 435 436 437 438 439 440 441 442 443 444 ... 853 854

Comentários a estes Manuais

Sem comentários

Brocade Mobility Access Point System Reference Guide (Supp Manual do Utilizador Página 439

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Brocade Mobility Access Point System Reference Guide (Supp