Brocade Mobility Access Point System Reference Guide (Supp Manual do Utilizador descarregar pdf (Página 481)

100

101

Brocade Mobility Access Point System Reference Guide 471

53-1003100-01

FIGURE 35 SMART RF Recovery Configuration screen - Neighbor Recovery tab

18. Set the following Neighbor Recovery variables for the Smart RF configuration:

NOTE

The recovery parameters within the Neighbor Recovery, Interference and Coverage Hole Recovery

tabs are only enabled when Custom is selected as the Sensitivity setting from the Smart RF Basic

Configuration screen.

Power Hold Time

Defines the minimum time between two radio power changes during neighbor recovery. Set the

time in either Seconds (0 - 3,600), Minutes (0 - 60) or Hours (0 - 1). The default setting is 0

seconds.

5GHz Neighbor Power

Threshold

Use the spinner control to set a value from -85 to -55 dBm the access point’s 5.0 GHz radio uses as

a maximum power increase threshold if the radio is required to increase its output power to

compensate for a failed radio within the access point’s radio coverage area. The default value is -70

dBm.

2.4 GHz Neighbor Power

Threshold

Use the spinner control to set a value from -85 to -55 dBm the access point’s 2.4 GHz radio uses as

a maximum power increase threshold if the radio is required to increase its output power to

compensate for a failed radio within the access point’s radio coverage area. The default value is -70

dBm.

1 2 ... 476 477 478 479 480 481 482 483 484 485 486 ... 853 854

Comentários a estes Manuais

Sem comentários

Brocade Mobility Access Point System Reference Guide (Supp Manual do Utilizador Página 481

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Brocade Mobility Access Point System Reference Guide (Supp