Brocade Network OS NETCONF Operations Guide v4.1.1 Manual do Utilizador descarregar pdf (Página 124)

100

101

92 Network OS NETCONF Operations Guide

53-1003231-02

Fabric interface configuration management

</filter>

</get-config>

</rpc>

<rpc-reply message-id="1208" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<route>

<mcast>

<rbridge-id>

<rbridge-id>12</rbridge-id>

</rbridge-id>

<rbridge-id>

<rbridge-id>13</rbridge-id>

</rbridge-id>

</mcast>

</route>

</fabric>

</rpc>

Configuring the VCS Fabric virtual IP address

A Virtual IP address is assigned for each VCS Fabric. This virtual IP address is tied to the principal

switch in the cluster. The management interface of the principal switch can be accessed using this

virtual IP address. Because the Virtual IP address is the property of the Fabric Cluster, in the event

that the principal switch goes down, the next principal switch is assigned this address.

To configure the Virtual IP address, perform the following steps.

1. Issue the <edit-config> RPC to configure the <vcs> node in the

urn:brocade.com:mgmt:brocade-vcs namespace.

2. Under the <vcs> node, include the <virtual>/<ip> hierarchy of network nodes.

3. Under the <ip> node, include the <address> leaf element and set its value to the desired

virtual IP address.

NOTE

The virtual IP address must be an IPv4 address.

<edit-config>

</target>

<ip>

</ip>

</virtual>

</vcs>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="1209" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 621 622

Comentários a estes Manuais

Sem comentários

Brocade Network OS NETCONF Operations Guide v4.1.1 Manual do Utilizador Página 124

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Brocade Network OS NETCONF Operations Guide v4.1.1