Brocade Network OS NETCONF Operations Guide v4.1.1 Manual do Utilizador descarregar pdf (Página 340)

100

101

308 Network OS NETCONF Operations Guide

53-1003231-02

VXLAN configuration and management

</rpc>

<rpc-reply message-id="8" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

Configuring the NSX Controller

Prerequisite steps

Before you configure the NSX controller, complete the task in “Configuring the VXLAN Gateway”

on page 304. The purpose of this task is to generate the security certificate for the VXLAN

gateway. This procedure uses data shown in Figure 4.

1. Issue the <edit-config> RPC to edit the running configuration.

2. Access the <nsx-controller> container within the brocade-tunnels RPC with the name

controller1.

<edit-config>

</target>

<nsx-controller xmlns="urn:brocade.com:mgmt:brocade-tunnels">

<name>controller1</name>

</nsx-controller>

</config>

</edit-config>

</rpc>

<rpc-reply message-id="9" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

3. Within the <nsx-controller> container and the <name> node, set the element values for the

<connection-addr> container as listed below:

• Set the <address> element to the IP address for one of the NSX controllers in the control

cluster, in this case 10.30.5.74.

• Set the <method> element to ssl.

• Set the <port> element to 6632.

<edit-config>

</target>

<nsx-controller xmlns="urn:brocade.com:mgmt:brocade-tunnels">

<name>controller1</name>

<connection-addr>

</connection-addr>

</nsx-controller>

</config>

1 2 ... 335 336 337 338 339 340 341 342 343 344 345 ... 621 622

Comentários a estes Manuais

Sem comentários

Brocade Network OS NETCONF Operations Guide v4.1.1 Manual do Utilizador Página 340

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Brocade Network OS NETCONF Operations Guide v4.1.1