Brocade Network OS NETCONF Operations Guide v4.1.1 Manual do Utilizador descarregar pdf (Página 365)

100

101

Network OS NETCONF Operations Guide 333

53-1003231-02

Configuring RSTP

For details, refer to “Specifying the bridge priority for all xSTP” on page 340. The range is 0

through 61440 and the priority values can be set only in increments of 4096. The default value

is 32768.

<spanning-tree>

<stp>

<bridge-priority>28672</bridge-priority>

</stp>

</spanning-tree>

</protocol>

5. Under the <rstp> node, set other RSTP parameters including the bridge forward delay,

maximum aging time, error disable timeout period, port channel path cost, and hello time.

<spanning-tree>

<rstp>

<forward-delay>20</forward-delay>

<max-age>25<max-age>

<error-disabled-timeout>

</error-disabled-timeout>

<port-channel>

<path-cost>custom</path-cost>

</port-channel>

<hello-time>5</hello-time>

</rstp>

</spanning-tree>

</protocol>

6. Optional: Enable the edge port feature on switch ports that connect directly to a workstations

or PC.

<shutdown xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"

operation="delete"/>

<spanning-tree xmlns="urn:brocade.com:mgmt:brocade-xstp">

</edgeport>

</spanning-tree>

</tengigabitethernet>

</interface>

For details, refer to “Enabling a port (interface) as an edge port” on page 359.

7. Re pe at step 6 for every port connected to workstations or PCs.

NOTE

Do not enable port fast on ports that connect to other switches.

Enabling port fast on ports can cause temporary bridging loops, in both trunking and

non-trunking mode.

8. To influence selection of the root port, set the port priority.

1 2 ... 360 361 362 363 364 365 366 367 368 369 370 ... 621 622

Comentários a estes Manuais

Sem comentários

Brocade Network OS NETCONF Operations Guide v4.1.1 Manual do Utilizador Página 365

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Brocade Network OS NETCONF Operations Guide v4.1.1