Brocade Network OS Message Reference v4.1.1 Manual do Utilizador descarregar pdf (Página 27)

Network OS Message Reference 11

53-1003227-01

Displaying message content on the switch

You can view the message documentation, such as the message text, message type, class (for

Audit messages), message severity, cause, and action, on the switch console by using the rasman

message id message_ID command.

To display the message documentation on the switch, perform the following steps.

1. Log in to the switch as admin.

2. Use the rasman message id message_ID command to display the documentation of a

message. The message_ID values are case-sensitive.

For example, execute the following command to display the documentation for EM-1059.

switch# rasman message id EM-1059

Miscellaneous EM-1059(7m)

MESSAGE

EM-1059 - <Slot number or Switch> with ID <Blade Id> may not

be supported on this platform, check FOS firmware version as

a possible cause.

logging auditlog class This command sets the event classes for Audit log messages.

logging raslog console This command sets a filter based on the severity level for the messages to be

displayed on the system console.

logging syslog-facility local This command sets the syslog facility.

logging syslog-server This command configures a syslog server to which the switch can forward the

messages.

show logging auditlog This command displays the Audit log messages on the local switch or the specified

switches.

NOTE: This command can be disruptive because it displays all the logs in the buffer

continuously. Use | more to see output page by page.

show logging raslog This command displays the error log message on the local switch, the specified

switch, or interface module. The command includes options to filter the messages

based on the message attribute and the severity level, and also to set the count of

messages to display, and to display messages in reverse order.

NOTE: This command can be disruptive because it displays all the logs in the buffer

continuously. Use | more to see output page by page.

show running-config

logging

This command is used to display the logging settings on the local switch.

show running-config

logging auditlog class

This command displays the event class configured for the Audit log.

show running-config

logging raslog

This command displays the RASLog console severity level on the local switch or the

specified switch.

show running-config

logging syslog-facility

This command displays the syslog facility level.

TABLE 5 Commands for viewing or configuring the message logs (Continued)

Command Description

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 477 478

Comentários a estes Manuais

Sem comentários

Brocade Network OS Message Reference v4.1.1 Manual do Utilizador Página 27

Comentários a estes Manuais

Manuais e produtos relacionados com Acessórios para Computador Brocade Network OS Message Reference v4.1.1